Expert Power Control 8031-4

Product no.: 00080314

Time of delivery: about 6-8 weeks

Possible delivery methods: DHL Standard 1, DHL Standard 2, UPS Standard Domestic, DHL Standard Domestic, Forwarder, UPS Standard

Additional product information

Product brief	Download
Load outlets	8 x Type G (BS 1363)
Total current measurement	yes
Power supplies	1 x BS 1363- 16 A
Sensor inputs	2
Residual current monitor (RCM)	yes
Case type	19 inch

8 Power Ports individually switchable directly on the device, via HTTP, command line tool and RS232 serial interface
Status and power-up delay individually adjustable for each Power Port after power blackout (0...9999 seconds)
Latency time of 1 second prevents simultaneous power-up of multiple Power Ports
Programmable timetables and turn-on/turn-off sequences
2 energy meters, one meter continuously, the other resettable
Metering of energy, current, power factor, phase angle, frequency, voltage and active / apparent / reactive power
Residual current metering (RCM) type A
A clearly visible LED display per bank for total current, IP address, sensor data and error reports
8-channel watchdog, an individual watchdog (ICMP/TCP) can be assigned for each Power Port
Integrated overvoltage protection (SPD) type 3 prevents damage of device and of connected consumers (L-N, L/N-PE), status retrievable over network
Dedicated high-inrush relays avoid welding of relay contacts at start-up peaks
2 interfaces for optional sensors for environmental monitoring (temperature, humidity and air pressure)
Event-based port switching possible by set sensor thresholds
Internal beeper for acoustic alarm for set sensor thresholds
Free iOS- and Android-App GUDE Control+ allows access from anywhere
Low internal power consumption
Developed and manufactured in Germany

Dynamic IP address allocation by DHCP or manual allocation with static IP address
IPv6-ready
Firmware update over Ethernet during operations (without reboot of device or load outlets)
NTP function can be activated
HTTP/HTTPS, e-mail (SSL, STARTTLS)
SNMPv1, v2c, v3 (Get/Traps)
TLS 1.0, 1.1, 1.2
Syslog support
IP Access Control List
Secure login through SSL
Configuration and control via Telnet possible
Radius and Modbus TCP support
Comfortable configuration by web browser, Windows or Linux tool
10/100 Mbit/s